Flame retardant, uncatalyzed Silicone Rubber Base
FEATURES
? Flame retardant (UL-94 V-0 with and without pigments)
APPLICATIONS
? Rubber parts for home electric appliances
? Anode caps
TYPICAL PROPERTIES1
Specification Writers: These values are not intended for use in preparing specifications. Please contact your local XIAMETER? sales representative prior to writing specifications on this product.
Test Method*
Property
Unit
Value
As supplied
CTM 0176
Appearance
White
JIS K 6249
Plasticity
mm/100
258
As cured
JIS K 6249
Density
g/cm3
1.37
JIS K 6249
Hardness, JIS type A
55
JIS K 6249
Tensile strength, JIS#3
MPa
7.2
JIS K 6249
Elongation, JIS#3
%
470
JIS K 6249
modulus, JIS#3
MPa
2.1
JIS K 6249
Tear strength, crescent
N/mm
12
JIS K 6249
Tear strength, angle
N/mm
26
JIS K 6249
Compression set
(180 °C / 22 hours)
%
26
JIS K 6255
Rebound
%
57
JIS K 6249
Linear shrinkage (disc)**
%
2.7
JIS K 6249
Volume resistivity
Ohm cm
5.0 E+16
JIS K 6249
Dielectric strength
(at room temperature)
kV/mm
32
1. Properties obtained using 0.4 part of SRX 557 U and 0.5 part of RC-4 (50P) (2,5-bis(tert-butylperoxy)-2,5-dimethyl hexane, 50% masterbatch) per 100 parts of XIAMETER? RBB-6300-50 BASE on 2mm thick slabs: molded 10 minutes at 160°C (320°F) and post-cured 4 hours at 200°C (392°F).
*CTM: Corporate Test Method, copies of CTMs are available on request.
JIS: Japanese Industrial Standard.
** Linear shrinkage depends on the curing conditions such as type of curing agent, curing temperature and size of molded product.